PORTFOLIO

Projektdarstellungen auf der Webseite

Jedes von der Gebert Rüf Stiftung geförderte Projekt wird mit einer Webdarstellung zugänglich gemacht, die über die Kerndaten des Projektes informiert. Mit dieser öffentlichen Darstellung publiziert die Stiftung die erzielten Förderresultate und leistet einen Beitrag zur Kommunikation von Wissenschaft in die Gesellschaft.

Close

Antefil – Microengineered Hybrid Fibres

Redaktion

The project management is responsible for the content of the information provided.

Projektdaten

  • Projekt-Nr: GRS-046/21 
  • Förderbeitrag: CHF 150'000 
  • Bewilligung: 30.06.2021 
  • Dauer: 12.2021 - 06.2023 
  • Handlungsfeld:  InnoBooster, seit 2018

Projektleitung

Projektbeschreibung

Moving structures are more ecological when made from lightweight materials, because they reduce the energy consumption and therefore the carbon footprint generated by moving the part. This is why composites, predominantly light plastic materials reinforced with stiff and strong fibres made from glass or carbon, were developed in the early days of spaceflight and modern aviation and have since found applications in almost any market related to structures – from boats, cars and other vehicles over wind power, buildings and construction to sports and leisure equipment. However, the bottleneck in the manufacturing of such components has remained the same since the beginning: combining the strong fibres with the light plastic. Traditional approaches rely on pushing the plastic in liquid form in between the fibres. This step, called impregnation or infusion, is either performed in a mould during the fabrication of a component itself or even earlier in the value chain, while producing a semi-finished material to later be used as feedstock. As a result, the industry has developed complex value chains based on either expensive intermediate processes or excessively time- and energy-intensive manufacturing methods. A great example are wind turbine blades: these 70-plus meter long behemoths occupy moulds for 24 hours or more and cost up to half a million dollars to produce – and remember that each turbine carries three of those blades! Even worse, such large structures can only economically be produced using hazardous reactive resins, which cannot be re-processed once cured. This means that after 15-25 years of use, these wind blades cannot be recycled and either end up in long-term storage or in landfills. Having deployed almost 600 kilotons of composites in 2018 for just wind power alone means we need to find more sustainable and efficient materials, and processing solutions for this industry. With the technology we have developed at Antefil, we completely circumvent the bottleneck in today’s value chains: by coating every individual reinforcing fibre with a meltable plastic while they are produced, we generate hybrid fibre yarns which already contain all materials needed to form a full composite part – already on the microscale and entirely without ever having to go through a slow impregnation process. This highly scalable and cost-effective fibre production yields materials which can be handled like any textile known to the industry and which require only heat and minimal pressure to be converted, practically instantly, into lightweight structures. And on top of the cost- and time-savings this novel technology provides, the meltable plastics used are non-reactive and thus not harmful to workers and can be re-processed, enabling the use of welding technologies to join parts together and paving the way for a circular materials economy. Antefil’s microengineered hybrid fibres carry the potential to make composites greener and more affordable, transforming the way we produce lightweight structures.

Stand/Resultate

Through Antefil, we want to transform the production of lightweight fibre-reinforced composite structures to more cost- and energy-efficient value chains based on the use of microengineered hybrid fibres. The technology behind the fabrication and use of such fibres has been developed by our team at ETH Zurich and is protected through a patent filed by ETH Transfer. We have acquired interest from various market segments (predominantly in the automotive, mobility and wind power industries) and devised a go-to-market strategy which enables us to scale the fibre production from our current prototype line to mass production by staged entry of different-sized verticals. The InnoBooster project supporting Antefil in scaling its previous production capacity to enable larger sample pilots with customers and in developing coating hardware for implementation in outsourced production lines at partnering factories. During the early stages of the project, the founding team has incorporated the company Antefil Composite Tech AG, which successively received the ETH spin-off label and has raised CHF 1.5 million in additional funding during the project. The ultimate goal of the InnoBooster project was to establish the market introduction of the company’s hybrid fibre products. This has been achieved through multiple pilot projects with promising customers as well as through a joint demonstration conducted together with Bionic Composite Technologies AG (Biontec) and the Institute for Materials Technology and Plastics Processing (IWK) at Ostschweizer Fachhochschule (OST), which was co-funded through an Innosuisse innovation cheque. The final demonstrator highlights the efficiency of using Antefil’s hybrid fibre materials in tailored preforms produced by Biontec for local reinforcments in injection moulded components and thereby provides a first highly promising application for this innovative technology.

Links

Am Projekt beteiligte Personen

Dr. Christoph Schneeberger, Project leader, executive lead at Antefil
Alex Luijten, process engineer at Antefil
Collaborators:
Nicole Aegerter, operational lead at Antefil
Prof. Dr. Paolo Ermanni, technology lead at Antefil and head of CMASLab at ETH Zurich
Dr. Thomas Billeter, financial lead at Antefil

Letzte Aktualisierung dieser Projektdarstellung  18.03.2024